Phone A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone.

The users can now use the IVR system to obtain specific details about the device’s certificate type. Cancel Busy Call Forward. To cancel “Busy Call Forward”, dial “*91”, wait for dial tone, then hang up. Note: For UCM63xx, it's recommended to use the latest UCM firmware so it's most compatible with Wave latest versions. The HT801 is designed to connect to a VoIP phone service where a traditional landline is not required or is not available (eg fibre-to-the-premises broadband connections).

During an active call, press “Flash” button on the analog phone (if the phone has that button) to place the call on hold. Busy Call Forward: Dial “*90” and then the forwarding number followed by “#”. Wait for dial tone then hang up.

In situations where only one analogue phone (or a multi-handset cordless phone base) is to be connected to the VoIP phone service then the lower cost Yeastar TA100 may be a better option. Our review of the adapter series covers key features, advantages, pricing, as well as how to buy. Features of Grandstream’s HandyTone ATA Series Grandstream HT813 The Grandstream HT801 is ideal for situations in which multiple analogue phones (or a loud bell) need to be connected to a VoIP phone service (see description below for more information). You can place a call on hold by pressing the “flash” button on the analog phone (if the phone has that button).Finally, if experiencing downtime is a concern, Grandstream’s HandyTone Series includes a failover SIP server, which automatically switches to a secondary server if the main server loses connection. Automatic provisioning makes system setup a manageable process for those with varying degrees of technical knowledge. If you plan to keep the Handy Tone within a private network behind a firewall, we recommend using STUN Server. The following three settings are useful in the STUN Server scenario: The Grandstream HT801 VoIP adaptor enables analogue phones to connect to a fibre broadband phone service. Grandstream’s HT818 gives users access to the above features and has a total of eight FXS ports. Advantages of Grandstream’s ATA HandyTone Series

The Ethernet LED lights up when the HT801/HT802 is connected to your network through the Ethernet port and it flashes when there is data being sent or received. To toggle between incoming call and current call, you need to press the “Flash” button. The first call is placed on hold. The Grandstream HT801 also enables analogue devices such as loud bells to be used on a VoIP service. The screenshots below are taken from an older firmware version. With newer version adaptors, the field entries are still correct information entries it's just that some fields have moved and are now in the FXS port tab. With the later firmware editions, please make sure to set "enable port" to YES before saving. The computer must be connected to the same sub-network as the HT801. This can be easily done by connecting the computer to the same hub or switch as the HT801. CONFIGURING HT801 THROUGH VOICE PROMPTS

With the HT802, users can access two lines. Moving up in the Series – HandyTone’s HT812 features an integrated gigabit NAT router, which increases speed. This is included at no additional cost and ultimately can lead to a more stable connection. Assuming that phones A and B are in conversation. The phone A wants to blind transfer phone B to phone C:

You'll find the correct Firmware Server Path for your Grandstream at: www.grandstream.com/support/firmware Testing your Phone's setup: Alternatively, the HT801 can easily be reset to its default settings and configured for connection to another VoIP internet phone service.

That’s a wrap

Please refer to the user manual for more information about IVR and how to access its menu options. REBOOTING HT801 Using Web UI The HT801 and HT802 are designed for easy configuration and easy installation, to connect your HT801 or HT802, please follow the steps above: For those who want the flexibility of using their own VOIP Phone ot ATA, Port out at the end of contract, if you can.